3. The related accessories requirements for imported faucets are different from those for domestic faucets. Generally, the upper faucet of the imported faucet has soft and hard points, and the hose (stainless steel braided tube) is the most. The movable nut end has 3/8 inch of the inch, and the matched triangular valve can only be selected. In addition, the launching component The nozzle is 11/4 inches.
4. When taking over, the left side is hot water, the right side is cold water, and the two tubes are 100mm - 200mm apart. After the position of the inlet joint is fixed, remove the faucet. After the wall mud is completed, install the faucet to prevent the coating on the surface of the faucet from being worn and scratched. If an imported product such as a shower is used, a booster pump is pre-installed to ensure that the water is normal.